![]() ![]() ![]() The "?" gets filled in during insertion and the block name uses either a "H" or "V" depending on the selected orientation. For example, the following makes the left and right-hand sides of the enclosing box cyan using linetype 'Hidden2' and the top and bottom blue using the default linetype:īlock name used for insertion. The keywords are encoded into the "BOX_RIGHT", "BOX_LEFT", "BOX_TOP" and "BOX_BOTTOM" entries in the specification table of a module. ![]() Encode this information as a series of keywords as if you were using the CHPROP command in AutoCAD to make the change. You can instruct AutoCAD Electrical toolset to draw the rectangular box using non-default line properties for color, layer, linetype, or ltscale. The following are optional parameters for parametric build symbol placement: 3 = inserted centered between the bus lines of the ladder.2 = inserted near the left or top bus line of the ladder.1 = inserted near the right or bottom bus line of the ladder.Specifies the insertion position for the module when inserted during the Spreadsheet to PLC I/O utility. You can suppress the rectangular box around the finished module by removing these entries from the specification table of a module. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |